Honda Accord

of release

Repair and operation of the car



Honda Chord
+ Cars of the Honda Accord brand
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Engine management
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Search of causes of failures of electric equipment
   Safety locks - the general information
   Chain breakers
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Check of serviceability of functioning and replacement of understeering switches
   Check of serviceability of functioning and replacement of the switch of ignition and lock of blocking of a steering column
   Check of serviceability of functioning and replacement of switches of the dashboard
   Check of serviceability of functioning of measuring instruments of a combination of devices
   Removal and installation of a combination of devices
   Removal and installation of the radio receiver and loudspeakers
   Removal and installation of the antenna of the radio receiver
   Replacement of lamps of head headlights
   Adjustment of the direction of optical axes of head headlights
   Replacement of block headlights
   Replacement of lamps
   Running fires of daylight (DRL)
   Check of serviceability of functioning and replacement of an electric motor of the drive of screen wipers
   Check of serviceability of functioning and replacement of horns of a horn
   Check of serviceability of functioning and recovery repair of a heater of back glass
   Control system of speed (темпостат) - general information and check of serviceability of functioning
   The electric drive of window regulators - general information and check of serviceability of functioning
   The uniform lock - general information and check of serviceability of functioning
   The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
   Safety cushions - the general information
+ Schemes of electric equipment


Установка межкомнатных дверей

Check of serviceability of functioning and replacement of switches of the dashboard

The models of cars considered in the present manual are equipped with system of additional safety (SRS). Before starting performance of any works near the block of a safety cushion, a steering column or the dashboard, disconnect SRS in order to avoid getting injured at its casual operation (see the Section of the Safety cushion - the general information). It is easy to distinguish an electrical wiring of a chain of SRS on yellow color of isolation.

Main switch of activation of a tempostat

CHECK

 PERFORMANCE ORDER

1. For check the switch needs to be removed from the car.
2. With the help or the lamp sampler equipped with the individual power supply check existence of conductivity between switch plugs in both of its provisions. In case of need replace assembly.

 

REPLACEMENT

 PERFORMANCE ORDER

1. Hook the switch the small screw-driver and take it from the dashboard. Disunite the electric socket.

In order to avoid damage of plastic stick an adhesive tape strip on a screw-driver sting.

2. Disconnect an electrical wiring and remove assembly of the switch.
3. Installation is made upside-down.

Switch of the alarm system

CHECK

 PERFORMANCE ORDER

1. For check release the switch from facing of assembly of panel hours.
2. Make sure of correctness of distribution of conductivity between plugs in both provisions of the switch. In case of need make assembly replacement.

 

REPLACEMENT

 PERFORMANCE ORDER

1. Having accurately hooked, take assembly of panel hours with the casing from the central section of the dashboard.

2. Disunite the 10-contact socket from the back party of the switch. Wring out a lock uvula and release assembly of the switch from the panel of facing of hours.
Switch of activation of heating of back glass

CHECK

 PERFORMANCE ORDER

1. The switch drives in structure of assembly of the control panel of functioning of the heater/conditioner of air. The description of procedures of removal and installation of assembly is provided in the Head of the Cooling system, heating.

2. Give to drink the help of an ohmmeter or the lamp sampler equipped with the independent power supply check existence of conductivity between the B4 and B9 plugs of the 22-contact socket of the control panel. Conductivity has to take place only at inclusion of heating and glass (the button of the switch is drowned). In case of need replace the switch.

REPLACEMENT

 PERFORMANCE ORDER

1. Turn out fastening screws among themselves of forward and back sections of the control panel. In the course of removal of the forward panel you hold it a front surface up.

Before starting dismantling of the control panel prepare the replaceable switch which, perhaps, should be ordered at company car repair shop.

2. Remove the old switch and establish on its place new, then joint among themselves and squeeze hands forward and back sections of the control panel of functioning of the heater/conditioner of air. Screw and tighten fixing screws.
3. Establish assembly of the control panel on the regular place (see the Head of the Cooling system, heating).