|
1. Weaken nuts of fastening of the corresponding forward wheel. A car front also establish to Poddomkratta it on props. Remove a wheel.
2. Take a cap from the plastic antispray screen.
|
|
3. Give a nut of fastening of the forward end of the pushing bar to a forward cross beam. |
|
|
4. Turn out bolts of fastening of the back end of a bar to the lower lever of a suspension bracket, remove a bar. |
5. Installation is made upside-down. Track that all fixture was tightened with the required effort.
6. Drive away the car in a specialized workshop for check and adjustment of angles of installation of forward wheels. |