Honda Accord

of release

Repair and operation of the car

Honda Chord
+ Cars of the Honda Accord brand
- Settings and routine maintenance
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of liquid of the power steering
   Check of the ATF AT level
   Replacement of motive oil and oil filter
   Check of a state and replacement of brushes of screen wipers
   Check, service and charging of the rechargeable battery
   Check of a state, adjustment of effort of a tension and replacement of driving belts
   Check of a state and replacement of the hoses located in a motive compartment
   Check of a condition of components of the cooling system
   Rotation of wheels
   Check of the brake system
   Check of a condition of seat belts
   Replacement of the filtering air cleaner element
   Check of a condition of components of a power supply system
   Check of level of the RKPP gearbox oil
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases
   Check of a state and replacement of spark plugs
   Check of a state and replacement of VV of candle wires, cover and runner of the distributor
   Check and replacement of the valve of system of the operated ventilation of a case (PCV)
   Check and adjustment of turns of idling
   Service of the cooling system (depletion, washing and filling)
   Replacement of brake fluid
   Replacement of liquid of automatic transmission (AT/CVT)
   Replacement of the RKPP gearbox oil
   Replacement of filters of the air conditioning system
   Check and adjustment of gaps of valves (as necessary)
   Dropping indicator of intervals of routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Engine management
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment

Почему возникает желание завести кошку или собаку?

Check of a state and replacement of brushes of screen wipers

(each 12 000 km [7500 miles] of a run or time in 6 months)


1. The condition of assemblies of screenwashes has to be checked regularly according to the schedule of routine maintenance of the car. Brushes look round on existence of mechanical damages, signs of weakening of fastening of components and wear of rubber working elements.
2. On working surfaces of brushes the road film accumulates over time that leads to noticeable decrease in efficiency of functioning of screen wipers. Regularly wash out brushes the cleaning solution of average concentration.
3. In the course of functioning of screen wipers there can be a gradual spontaneous otdavaniye of fixture, reliability of landing and which tightening also has to be checked regularly.
4. At identification of cracks or signs of wear of rubber working elements replacement of brushes is made.
5. Take away the screen wiper lever from glass.

6. Wring out inside a lock uvula and carefully remove a brush from a hook on the end of the lever.

7. In need of replacement of a working element of a screen wiper strongly squeeze lock uvulas on the end of a brush, then grasp an element and, having pulled, take it from a metal frame.

8. Take from a rubber working element metal holders and fill them in grooves of a new element.

9. Fill an element in a frame, having tracked reliability of a zashchelkivaniye of lock uvulas.
10. Put on a brush the lever of a screen wiper and fill it in a hook, having tracked reliability of a zashchelkivaniye of a lock uvula.