Honda Accord

of release

Repair and operation of the car



Honda Chord
+ Cars of the Honda Accord brand
- Settings and routine maintenance
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of liquid of the power steering
   Check of the ATF AT level
   Replacement of motive oil and oil filter
   Check of a state and replacement of brushes of screen wipers
   Check, service and charging of the rechargeable battery
   Check of a state, adjustment of effort of a tension and replacement of driving belts
   Check of a state and replacement of the hoses located in a motive compartment
   Check of a condition of components of the cooling system
   Rotation of wheels
   Check of the brake system
   Check of a condition of seat belts
   Replacement of the filtering air cleaner element
   Check of a condition of components of a power supply system
   Check of level of the RKPP gearbox oil
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases
   Check of a state and replacement of spark plugs
   Check of a state and replacement of VV of candle wires, cover and runner of the distributor
   Check and replacement of the valve of system of the operated ventilation of a case (PCV)
   Check and adjustment of turns of idling
   Service of the cooling system (depletion, washing and filling)
   Replacement of brake fluid
   Replacement of liquid of automatic transmission (AT/CVT)
   Replacement of the RKPP gearbox oil
   Replacement of filters of the air conditioning system
   Check and adjustment of gaps of valves (as necessary)
   Dropping indicator of intervals of routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Engine management
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment



Check of the ATF AT level

(each 4800 km [3000 miles] of a run or time in three months)

Correctness of the ATF level is one of critical operational parameters of the models equipped with AT. Lowering of the ATF level can lead to pro-slipping of the converter of rotation whereas the excessive amount of liquid leads to its foaming, to formation of leaks and is fraught with a transmission exit out of operation.

Check of the ATF level has to be made on the car parked on the flat horizontal platform with minute switching off of the engine.

 PERFORMANCE ORDER

1. Take the measuring probe located in a forward part of a case of transmission near the right partition of a motive compartment on 4-cylinder models or in the left part of a compartment on the V6 models. The probe is equipped with the ring-shaped handle painted in brightly yellow color. Fingers remove traces of ATF from a probe edge and to the touch estimate its condition.
2. Carefully wipe an edge with pure rags and enter the probe back into the directing tube, having densely put a cover on a mouth.

3. Again take the probe from a mouth and determine the ATF level in a transmission case by the size of the moistened site of an edge. In case of need make the corresponding adjustment, through a funnel having added liquid of the required grade to transmission. On 4-cylinder models fill in liquid directly in a mouth of the directing tube of the measuring probe. On the V6 models it is provided a separate jellied opening from which it is necessary to turn out a stopper previously.

4. Rise in the ATF level from the lower bound of working range of the probe to top requires about 0.6 l of liquid - the flood is made in the small portions in stages, every time checking level.
5. Along with level it is necessary to check as well a condition of ATF. If the liquid moistening the end of an edge of the probe has a dark red-brown shade, or smells of ashes, ATF should be replaced (see the Section Service of the Cooling System (depletion, washing and filling)). At lack of confidence in correctness of assessment of a condition of transmission liquid compare it on color and a smell to fresh ATF.