|
1. Weaken nuts of fastening of the corresponding forward wheel. A car front also establish to Poddomkratta it on props. Remove a wheel.
2. Remove an overlay of a front bumper (see the Section Removal and installation of overlays of forward and back bumpers).
|
|
3. Turn out fixing screws, release clamps and remove a loker of protection of an arch of a wheel with a rubber mudguard. |
|
|
4. Open a forward door and turn out the top bolt of fastening of a back part of a wing to a body. |
5. Turn out fixing screws and remove an external plastic protective overlay of a threshold for the purpose of ensuring access to the lower bolt of fastening of a back part of a wing.
|
|
6. Turn out the remained fixture. |
|
|
7. Give the remained bolts of fastening of a wing. |
8. Remove a wing (it will be reasonable to use the help of the assistant for the purpose of minimization of risk of damage of surrounding body panels).
9. Installation is made upside-down. |
