Honda Accord

of release

Repair and operation of the car



Honda Chord
+ Cars of the Honda Accord brand
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Engine management
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Care of components of a body and bottom of the car
   Care of vinyl elements of finishing
   Care of an upholstery and carpets of salon
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and locks of the car
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of overlays of forward and back bumpers
   Removal and installation of forward wings
   Removal, installation and adjustment of a cover of the luggage compartment
   Removal and installation of a latch and cylinder of the lock of a cover of the luggage compartment
   Driving cables of an otpuskaniye of locks of a cover of the luggage compartment and door of the hatch of a jellied mouth of the fuel tank
   Removal and installation of panels of an internal upholstery of doors
   Removal, installation and adjustment of provision of doors
   Removal and installation of a latch and external handle / cylinder of the lock of a door
   Removal and installation of door glasses
   Removal and installation of regulators of window regulators
   Removal and installation of rear-view mirrors
   Removal and installation of the central console
   Removal and installation of finishing sections of the dashboard
   Removal and installation of a casing of a steering column
   Removal and installation of the main section of the dashboard
   Removal and installation of a forward fairing
   Removal and installation of seats
   Removal and installation of the back shelf
   Geometrical sizes of various options of execution of a body
+ Onboard electric equipment
+ Schemes of electric equipment


Монолитное строительство

Removal and installation of a latch of the lock of a cowl and cable of its drive

The models of cars considered in the present manual are equipped with system of additional safety (SRS). Before starting performance of any works near the block of a safety cushion, a steering column or the dashboard, disconnect SRS in order to avoid getting injured at its casual operation (see the Head Onboard electric equipment). It is easy to distinguish an electrical wiring of a chain of SRS on yellow color of isolation.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

Latch

 PERFORMANCE ORDER

1. Lead round assembly of a latch a marker or a chertilka for the purpose of a guarantee of correctness of its installation at assembly. Release clamps and remove plastic facing of a latch. Turn out fixing bolts from the radiator support panel and remove a latch.

2. Disconnect a lock otpuskaniye cable from assembly of a latch.

3. Installation is made upside-down.

Adjust the provision of a latch so that the cowl was reliably fixed by the lock in a closed position - rubber pillows of support have to be flattened slightly.

Driving cable

 PERFORMANCE ORDER

1. Disconnect a driving cable of an otpuskaniye of the lock of a cowl from assembly of a latch.
2. Tie up a piece of a string by the end of the released cable and release a cable from intermediate clamps and guides.
3. Remove a loker of protection of an arch of a wing (see the Section Removal and installation of forward wings).

4. In interior of the car remove the main and forward sections of an overlay of a threshold of a driver's door.

5. Turn out two fixing bolts and separate the cowl lock otpuskaniye lever from a partition. Disconnect a cable from the lever.

6. Push the rubber plug through passage through a partition and involve assembly of a cable in interior of the car. Make sure that assembly of a new cable is equipped with the plug through passage. Untie an old cable from a string and tie up instead of it replaceable.
7. Involve assembly of a new cable for a wire through a partition in a motive compartment.
8. Connect a new cable to the lock otpuskaniye lever, having tracked reliability of its fixing in a basic arm.
9. You make further assembly as it should be, the return to a dismantle order.

Fingers densely push the plug of a cable through passage into a partition of a motive compartment (from salon) - track correctness of landing of the plug in a partition.