Honda Accord

of release

Repair and operation of the car



Honda Chord
+ Cars of the Honda Accord brand
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Engine management
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Care of components of a body and bottom of the car
   Care of vinyl elements of finishing
   Care of an upholstery and carpets of salon
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and locks of the car
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of overlays of forward and back bumpers
   Removal and installation of forward wings
   Removal, installation and adjustment of a cover of the luggage compartment
   Removal and installation of a latch and cylinder of the lock of a cover of the luggage compartment
   Driving cables of an otpuskaniye of locks of a cover of the luggage compartment and door of the hatch of a jellied mouth of the fuel tank
   Removal and installation of panels of an internal upholstery of doors
   Removal, installation and adjustment of provision of doors
   Removal and installation of a latch and external handle / cylinder of the lock of a door
   Removal and installation of door glasses
   Removal and installation of regulators of window regulators
   Removal and installation of rear-view mirrors
   Removal and installation of the central console
   Removal and installation of finishing sections of the dashboard
   Removal and installation of a casing of a steering column
   Removal and installation of the main section of the dashboard
   Removal and installation of a forward fairing
   Removal and installation of seats
   Removal and installation of the back shelf
   Geometrical sizes of various options of execution of a body
+ Onboard electric equipment
+ Schemes of electric equipment


проститутки Новосибирск элитные

Driving cables of an otpuskaniye of locks of a cover of the luggage compartment and door of the hatch of a jellied mouth of the fuel tank

Cable of an otpuskaniye of the lock of a cover of the luggage compartment

 PERFORMANCE ORDER

1. The description of procedures of removal of a latch of a cover of the luggage compartment and a detachment from it a driving cable is provided in the Section Removal and installation of a latch and the cylinder of the lock of a cover of the luggage compartment.

2. In luggage take a spare wheel, then remove the left side panel of finishing with a ware pocket for the purpose of ensuring access to a tip of a cable of the drive of an otpuskaniye of the lock of a cover of the hatch of a jellied mouth of the fuel tank. Turn a cable tip on 1/4 turns on purpose and take from assembly of a door.

3. Remove the lower part of a back seat (see the Section Removal and installation of seats). On Coupet's models remove also a back of a back seat.
4. Having hooked, remove overlays of thresholds of doors from the driver's party of the car (on Coupet's models a door one). On 4-cylinder models remove the lower panel of finishing of the left central rack.
5. Unbend a carpet, having provided access to a driving cable of an otpuskaniye of the lock. Release all intermediate clamps of conducting of a cable.
6. Having hooked, open the top cover of the castle cylinder in a casing of the lever of a remote otpuskaniye of the lock near a driver's seat. Insert a key into the lock and sharply turn it counterclockwise, then take a key together with the cylinder from assembly.
7. Remove a small plastic cover from lateral face of the lever of a remote otpuskaniye of the lock and weaken the bolt located under it (use a face key, having pushed its head through an opening under installation of the castle cylinder. Shift a lever casing for removal it from a bolt back.

8. Turn a casing and take a cable cover from a clamp, and a core tip - from the lever.

9. Tie up a string piece by the end of a cable.
10. Involve assembly of a cable to the luggage compartment so that the string which is tied up by its end seemed.
11. Tie up a string to a tip of a new cable and stretch assembly in regular situation, having connected it to the lever. Further assembly is made as it should be, the return to an order of dismantle of the corresponding components.