Honda Accord

of release

Repair and operation of the car



Honda Chord
+ Cars of the Honda Accord brand
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Engine management
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Care of components of a body and bottom of the car
   Care of vinyl elements of finishing
   Care of an upholstery and carpets of salon
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and locks of the car
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of overlays of forward and back bumpers
   Removal and installation of forward wings
   Removal, installation and adjustment of a cover of the luggage compartment
   Removal and installation of a latch and cylinder of the lock of a cover of the luggage compartment
   Driving cables of an otpuskaniye of locks of a cover of the luggage compartment and door of the hatch of a jellied mouth of the fuel tank
   Removal and installation of panels of an internal upholstery of doors
   Removal, installation and adjustment of provision of doors
   Removal and installation of a latch and external handle / cylinder of the lock of a door
   Removal and installation of door glasses
   Removal and installation of regulators of window regulators
   Removal and installation of rear-view mirrors
   Removal and installation of the central console
   Removal and installation of finishing sections of the dashboard
   Removal and installation of a casing of a steering column
   Removal and installation of the main section of the dashboard
   Removal and installation of a forward fairing
   Removal and installation of seats
   Removal and installation of the back shelf
   Geometrical sizes of various options of execution of a body
+ Onboard electric equipment
+ Schemes of electric equipment



Removal and installation of rear-view mirrors

External mirrors

 PERFORMANCE ORDER

1. On the models equipped with the electric drive of external mirrors remove the panel of an internal upholstery and the moisture filter of a door (see the Section Removal and installation of panels of an internal upholstery of doors).
2. Having hooked the screw-driver, remove the triangular decorative panel of internal finishing of basic knot of a mirror.
3. At the corresponding complete set disconnect an electrical wiring from a mirror.

4. Turn out three fixing bolts and remove assembly of a mirror from a door.

5. Installation is made upside-down.

Internal mirror

 PERFORMANCE ORDER

1. Having pushed assembly of a mirror down, release a basic part of its arm from the assembly bracket pasted on a windshield.

The arm is fixed in a bracket by means of a spring clamp which in case of need should be hooked the screw-driver.

2. If removed, fill into place a spring clamp. Develop assembly of a mirror under 90 ° and fill a basic part of its arm in an assembly bracket of the basis on glass. Push assembly top, then develop it in regular situation. Make sure of reliability of fixing of assembly in an assembly bracket.