|
1. Disconnect a negative wire from the battery.
|
|
If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action! |
|
|
2. Having hooked the screw-driver, remove a forward cover of the central console. |
|
|
3. By means of mount remove the panel of facing of the lever of the selector of transfers of AT. On models remove the switching lever handle from RKPP (see the Head Korobk of gear shifting). |
4. Having hooked, release assembly of coasters from the console.
|
|
Hook assembly only under a first line and do not pull it from the console for a cover. |
|
|
5. Having accurately hooked, remove the panel of finishing of the indicator of position of the lever of the AT selector from the console. |
|
|
6. Remove the central armrest and take the ground panel of a console ware box. |
|
|
7. Turn out screws of fastening of the console to a car floor. |
8. Give forward fixing screws and remove assembly of the central console from the switching lever. Disconnect an electrical wiring and take the console from interior of the car.
9. Installation is made upside-down. |