Honda Accord

of release

Repair and operation of the car



Honda Chord
+ Cars of the Honda Accord brand
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Engine management
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Care of components of a body and bottom of the car
   Care of vinyl elements of finishing
   Care of an upholstery and carpets of salon
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and locks of the car
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of overlays of forward and back bumpers
   Removal and installation of forward wings
   Removal, installation and adjustment of a cover of the luggage compartment
   Removal and installation of a latch and cylinder of the lock of a cover of the luggage compartment
   Driving cables of an otpuskaniye of locks of a cover of the luggage compartment and door of the hatch of a jellied mouth of the fuel tank
   Removal and installation of panels of an internal upholstery of doors
   Removal, installation and adjustment of provision of doors
   Removal and installation of a latch and external handle / cylinder of the lock of a door
   Removal and installation of door glasses
   Removal and installation of regulators of window regulators
   Removal and installation of rear-view mirrors
   Removal and installation of the central console
   Removal and installation of finishing sections of the dashboard
   Removal and installation of a casing of a steering column
   Removal and installation of the main section of the dashboard
   Removal and installation of a forward fairing
   Removal and installation of seats
   Removal and installation of the back shelf
   Geometrical sizes of various options of execution of a body
+ Onboard electric equipment
+ Schemes of electric equipment





Removal and installation of regulators of window regulators

For protection of hands against cuts at performing procedures through access openings in a doorframe put on gloves.

Forward doors

 PERFORMANCE ORDER

1. Remove the panel of an internal upholstery of a door and the moisture filter (see the Section Removal and installation of panels of an internal upholstery of doors).
2. Remove a windowpane (see the Section Removal and installation of door glasses).
3. On the models equipped with the electric drive of window regulators disunite the socket of an electrical wiring of the driving motor of the regulator.
4. Turn out bolts of fastening of assembly of the regulator / a driving electric motor of a door window regulator.

5. On Coupet's models regulators of scissors type are used. Before a reversing of fixing bolts mark situation back a bolt of the top roller guide. Turn out bolts of the top and back roller guides, then give four bolts of fastening of an electric motor (on models with the manual drive - window regulator handles).
6. Take assemblies of the lever of the equalizer and the regulator through specially provided opening in a doorframe.
7. Installation is made upside-down. Do not forget to grease rollers of guides and the rubbing surfaces of the regulator.

Back doors

 PERFORMANCE ORDER

1. Remove the panel of an internal upholstery of a door and the moisture filter (see the Section Removal and installation of panels of an internal upholstery of doors).
2. Remove a windowpane (see the Section Removal and installation of door glasses).
3. On the models equipped with the electric drive of window regulators disunite the socket of an electrical wiring of the driving motor of the regulator.

4. Turn out bolts of fastening of assembly of the regulator / a driving electric motor of a door window regulator.

5. Take assemblies of the lever of the equalizer and the regulator through specially provided opening in a doorframe.
6. Installation is made upside-down. Do not forget to grease rollers of guides and the rubbing surfaces of the regulator.