Honda Accord

1. Open a trunk lid and reliably record it in the top situation. Cover the painted panels of regions of the luggage compartment with protective slips or old blankets.
2. Disunite sockets of an electrical wiring of lamps of illumination of registration plate, stoplights and the actuation mechanism of the drive of the lock. Release wires from door assembly remove the lock activator (see the Sections Removal and installation of a latch and the cylinder of the lock of a cover of the luggage compartment and Driving cables of an otpuskaniye of locks of a cover of the luggage compartment and a door of the hatch of a jellied mouth of the fuel tank).

3. Lead round levels of door loops a marker.

4. Turn out bolts of fastening of loops to door assembly and by means of the assistant remove the last.

5. Installation is made upside-down. Track that loopy levels were put according to the tags put in the course of dismantle.

1. Having finished installation of a door, close it and make sure of correctness of placement in a body aperture. Updating of the provision of a door is made by weakening of loopy bolts and shift of levels within the stock determined by ovality of bolted openings in them. Having corrected the provision of a door, do not forget to tighten fixture.

2. For adjustment of height of provision of door assembly in a body aperture weaken bolts of fastening of assembly of the drummer of the lock, as appropriate correct position of the last, then again tighten fixture. Before weakening of bolts for orientation lead round a plate of the basis of the drummer a marker.

3. In conclusion adjust density of closing of a door by adjustment of height of persistent rubber pillows. The plane of a door has to fall into a closed position aflush with the surfaces of surrounding body panels.