Honda Chord
+ Cars of the Honda Accord brand
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
- Engine management
System of onboard diagnostics (OBD) - the principle of functioning and codes of malfunctions
Removal and PCM/ECM installation
Check of serviceability of a state and replacement of the sensor of provision of a butterfly valve (TPS)
Check of serviceability of a state and replacement of the sensor of absolute pressure in the pipeline (MAR)
Check of serviceability of a state and replacement of the sensor of temperature of the soaked-up air (IAT)
Check of serviceability of a state and replacement of the sensor of temperature of cooling liquid of the engine (EST)
Check of serviceability of a state and replacement of the sensor of VMT/provision of a bent shaft (TDC/ICR)
Check of serviceability of a state and replacement of the sensor of position of pistons (CYP)
Check of serviceability of a state and replacement of the detector of control of electric loadings (ELD)
Check of serviceability of a state and replacement of the sensor switch of pressure in system of hydrostrengthening of a wheel (PSP)
Check of serviceability of a state and replacement of the oxygen sensor (l-probe)
Check of serviceability of a state and replacement of the sensor of a detonation
Check of serviceability of a state and replacement of the sensor of speed of the movement of the car (VSS)
Check of serviceability of functioning and replacement of the valve of stabilization of turns of idling (IAC)
Check of serviceability of functioning and replacement of the air valve of correction of composition of air-fuel mix (FIA)
System of the operated ventilation of a case (PCV)
System of recirculation of the fulfilled gases (EGR) - the general information, check of a state and replacement of components
System of catching of fuel evaporations (EVAP) - the general information, check of a state and replacement of components
The catalytic converter - the general information, check of a state and replacement
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment
|
System of the operated ventilation of a case (PCV)
The PCV system (see an accompanying illustration) serves for decrease in issue in the atmosphere of hydrocarbonic connections at the expense of a conclusion from the engine of crankcase gases. The purge of the block is carried out by a pro-race of the fresh air arriving from the air cleaner through a case in which it mixes up with the collected evaporations and the gases which broke from combustion chambers and is removed via the PCV valve in the inlet pipeline.
The PCV valve, the filter of a purge and set of the vacuum hoses connecting the listed devices to the engine are among the main components of system.
For the purpose of maintenance of stability of turns of idling the PCV valve blocks a purge stream at deep depression in the inlet pipeline. In case of violation of serviceability of functioning of the engine (as, for example, at wear of piston rings) the system makes withdrawal of excess of crankcase gases through a ventilating tube back in the air cleaner.
The description of procedures of check and replacement of the PCV valve is provided in the Section Check and replacement of the valve of system of the operated ventilation of a case (PCV). |
|