Honda Accord

of release

Repair and operation of the car


Honda Chord
+ Cars of the Honda Accord brand
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
- Engine management
   System of onboard diagnostics (OBD) - the principle of functioning and codes of malfunctions
   Removal and PCM/ECM installation
   Check of serviceability of a state and replacement of the sensor of provision of a butterfly valve (TPS)
   Check of serviceability of a state and replacement of the sensor of absolute pressure in the pipeline (MAR)
   Check of serviceability of a state and replacement of the sensor of temperature of the soaked-up air (IAT)
   Check of serviceability of a state and replacement of the sensor of temperature of cooling liquid of the engine (EST)
   Check of serviceability of a state and replacement of the sensor of VMT/provision of a bent shaft (TDC/ICR)
   Check of serviceability of a state and replacement of the sensor of position of pistons (CYP)
   Check of serviceability of a state and replacement of the detector of control of electric loadings (ELD)
   Check of serviceability of a state and replacement of the sensor switch of pressure in system of hydrostrengthening of a wheel (PSP)
   Check of serviceability of a state and replacement of the oxygen sensor (l-probe)
   Check of serviceability of a state and replacement of the sensor of a detonation
   Check of serviceability of a state and replacement of the sensor of speed of the movement of the car (VSS)
   Check of serviceability of functioning and replacement of the valve of stabilization of turns of idling (IAC)
   Check of serviceability of functioning and replacement of the air valve of correction of composition of air-fuel mix (FIA)
   System of the operated ventilation of a case (PCV)
   System of recirculation of the fulfilled gases (EGR) - the general information, check of a state and replacement of components
   System of catching of fuel evaporations (EVAP) - the general information, check of a state and replacement of components
   The catalytic converter - the general information, check of a state and replacement
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment


Check of serviceability of a state and replacement of the sensor of position of pistons (CYP)

CHECK

 PERFORMANCE ORDER

1. The CYP sensor serves for definition of the current position of pistons. Information issued to them is used when determining the sequence of injection of fuel. The sensor is built in assembly of the distributor of ignition, its refusal leads to record in memory of system of self-diagnostics of codes of malfunction of P1381 and P1382.

2. For check of serviceability of functioning of the CYP sensor disunite a plait of an electrical wiring of the distributor and by means of an ohmmeter measure resistance between contact plugs 3 and 4. Compare result of measurement to requirements of Specifications.

3. Make sure of lack of conductivity between each of plugs and a workshop of car service.
4. In case of negative results of the described check replace the distributor (see the Head Elektrooborudovaniye of the engine).

REPLACEMENT

 PERFORMANCE ORDER

The CYP sensor is built in assembly of the distributor of ignition and its replacements is not provided in an individual order. In case of a sensor exit out of operation replace the distributor (see the Head Elektrooborudovaniye of the engine).